Jinyuan Technology Development Co., Ltd.
Foam Water Sprinkler
A brass - constructed sprinkler that can generate air - aspirated foam or discharge water, installable in pendent/upright ways for fire - fighting, especially for flammable liquid fire risks.
| Sprinkler Material : | Brass |
| Sprinkler Installation: | Pendent/Upright |
| Thread Size: | 1/2"3/4" |
| Temperature: | 68℃ |
| Glass Bulb Color : | None |
| Surface Finishing: | electroplating |
| MOQ: | 1000 pieces |
| Delivery Time: | 30days |
Email:Jony@jyfire.com.cn
Categories
RELATED PRODUCTS
Details Description
Foam water sprinkler is air aspirating foam discharge outlet designed for flammable liquid risks. It discharges foam in a pre-determined discharge pattern, as well as discharges water similar to standard spray sprinkler.
Product Parameters
| Type | Material | K-Factor | Response Type |
| Pendent | Brass + SS304 net | K1.4(K20) | / |
| Pendent | Brass + SS304 net | K2.9 (K42) | / |
| Pendent | Brass + SS304 net | K1.4 (K20) | Standard |
| Pendent | Brass + SS304 net | K2.9(K42) | Standard |
FAQ
Q: What is the advantage of the air - aspirating foam function?
A: The air - aspirating foam function can create a dense foam that effectively smothers flammable liquid fires, cutting off the oxygen supply and suppressing the fire more efficiently compared to water alone in such scenarios.
Q: Can this sprinkler be used in marine fire - protection systems?
A: Brass material has good corrosion resistance, so it can be used in marine fire - protection systems with proper maintenance. But it is recommended to consult our technical team to confirm the adaptability to the specific marine environment.
Q: How to determine the appropriate installation method (pendent or upright)?
A: Pendent installation is usually preferred for areas where fire suppression from above is needed, like open - space ceilings. Upright installation is suitable for situations where fire may spread upward, such as near equipment with upward - facing fire risks. The choice also depends on the overall fire - protection system design.
Q: Is there a difference in foam generation between 1/2" and 3/4" thread connections?
A: The thread connection size mainly affects the flow rate. The foam generation principle is the same. However, the 3/4" connection may allow a larger flow of foam solution and air, potentially generating more foam in a given time, while the 1/2" is more suitable for areas with lower flow requirements.
Q: Can the sprinkler be used with non - standard foam concentrates?
A: It is recommended to use standard fire - fighting foam concentrates that are compatible with the sprinkler's design. Using non - standard concentrates may affect the foam generation quality and fire - fighting performance. It is best to consult our technical support for foam compatibility.
Act now—stop fire risks at the source!
JINYUAN TECHNOLOGY DEVELOPMENT CO.,LTD
Tel.:86-18159244550 Mobil:18159244550
EMAIL:Jony@jyfire.com.cn
ADD:CHENGGONG TECHNOLOGY ZONE PHASE 3,XIMEI TOWN,NAN'AN QUANZHOU CITY
Category:
















































